Lightening wash: slight tonal change - 1/2 Deco envelope (12,50 gr.) + 100 ml. water + 20 ml. Oxy 20 or 30 vol. + 20 ml. Solfine shampoo for colored hair. Processing time: few minutes and check. Very light bleaching action: level change. - 1 Deco envelope (25 gr.) + 20 ml. Oxy 20 vol. + 40 ml. water + 10 ml. Solfine shampoo for colored hair. Processing time: 10 minutes and check. Light bleaching: to bleach colored hair (dark tips) from 1 to 2 levels - 1 Deco envelope (25 gr.) + 30 ml. Oxy 20 vol. + 30 ml. water + 10 ml. Solfine shampoo for colored hair. Processing time: 10 minutes and check. More intense bleaching action: to bleach 3 to 4 levels - 1 Deco envelope (25 gr.) + 75 ml. Oxy 20 vol. Processing time: 20 minutes and check. Very intense bleaching/streaks: to bleach 4 to 5 levels - 1 Deco envelope (25 gr.) + 75 ml. Oxy 30 vol. Processing time: 50 to 60 minutes.

CAUTION: The product has been formulated and tested to reduce all risks to consumers and hairdressers deriving from its use. Nevertheless given its composition, it is recommended to read these warnings carefully in order to prevent or minimize exposure risks. Contains persulphates. Carefully follow the directions printed on each sachet and employ the product for the foreseen use only. Do not apply if the scalp is damaged, irritated, or suffering from skin disorders (eczema, psoriasis, etc.). Can cause allergic reactions. Do not use the product in the case of intolerance to one or more of the substances included in the list of ingredients detailed on the package, or in the case of intolerance to similar products. Avoid contact with skin and eyes. Can cause irritation due to contact with the skin. If the product accidentally comes into contact with skin or eyes, immediately rinse well with water. If irritation persists, contact a specialist. Handle carefully. Wear plastic (polyethylene) disposable gloves, which adhere well and reach high on forearms, during all of the handling, application, and rinsing phases. It is recommended to mix with OXY only and to carefully observe the mixing ratios and volumes suggested for the various applications. Peroxides with high volumes and/or in quantities lower than the one indicated can cause overheating of the mixture. If this occurs, closely watch the progress of the lifting and, if necessary, rinse off the product and prepare a new mixture. The product is sensitive to high temperatures. The use of localized sources of heat is therefore not recommended. The oxidizing emulsion contains diluted hydrogen peroxide: avoid contact with eyes and skin. The product should be prepared under an exhaust hood. Mixing should be done in closed containers (shakers). Use immediately after mixing. Product residues must not be re-used and must be eliminated. Never leave the mixture in the closed mixing container. Apply the product in well-ventilated areas. Can permanently bleach fabrics, walls, and other materials. Immediately rinse any splashed product from these surfaces. Do not exceed the recommended processing times. Rinse hair well after application. Store in a cool and dry place, out of the reach of children. Professional product.

potassium persulfate, ammonium persulfate, sodium metasilicate, paraffinum liquidum (mineral oil/huile minérale), sodium stearate, silica, acrylates/C10-30 alkyl acrylate crosspolymer, sodium lauryl sulfate, aluminum distearate, tetrasodium edta, aloe barbadensis (aloe barbadensis leaf extract), CI 77007(ultramarines).